CM-1K Series
CM-1704MK
Metal roller short pressing plate type
Contact form
1NO/1NC Snap-action
Head structure
Metal roller short pressing plate type
Operating force OF
1.6N
Release force RF
0.42N
Pretravel PT (Length)
10mm
Overtravel OT (Length)
5.6mm
Movement differential MD (Length)
1.27mm
Operating position OP
30.2±0.4mm
Free position FP
32.5mm
Features of the CM-1K Series
■ High accuracy, Wide range of operation speed, High switch on and off capacity (15A)
■ Virous of actuators, action position is adjustable (such as CM-1701K)
■ The protective sleeve with the terminal provides better protection than the basic model
General Parameters
| Operating speed | 0.05 mmto 1 m/s Plunger type |
| Operating frequency | Electical: 20 operations/min. |
| Contact resistance | 25mΩ max. (initial value) |
| Insulation resistance | 100 MΩ min. (at 500 VDCmax.) |
| Minimum applicable load | Min DC24V 10mA |
| Rated insulation voltage UI | 300V |
| Rated impulse withstand voltage Uimp | 4 KV |
| Conventional free air thermal current Ith | 15 A |
| Vibration | (*10 to 20Hz): 1.5mm vibration amplitude action duration: 10 to 55Hz |
| Dielectric strength | 1000VAC, 50/60 HZ for 1 minute between terminals of the same polarity 1500VAC, 50/60 HZ for 1 minute between current-carrying and non-current-carrying metal parts 1500VAC, 50/60 HZ for 1 minute between each terminal and ground |
| Shock | Mechanical durable:1,000m/Sec²(about 100G'S) Malfunction:300m/Sec²(about 30G'S) |
| Ambient temperature | Using:-20~+80°C (With no icing) |
| Humidity | <85% RH |
| Electrical durability | More than 500,000 cycles(AC 240V/3A resistive load)More than 200,000 cycles(AC 240V/10A resistive load) |
| AC-15 Safety specification certified rating | 15 A/250 V |
| DC-13 Safety specification certified rating | 0.3 A/220 V |
| CCC certification specification | GB/T14048.5 |
| TUV certification specification | EN 60947-5-1 |
| CE certification specification | EN 60947-5-1 |
Specification
3C
CE
TUV
1NO/1NC Snap-action
Long platen type
With tail sleeve (Phenolic molding compound)
0.7N
0.14N
10mm
5.6mm
1.27mm
19±0.8mm
28.2mm
3C
CE
TUV
1NO/1NC Snap-action
Short platen type
With tail sleeve (Phenolic molding compound)
1.6N
0.28N
5mm
2mm
1mm
19±0.4mm
24.8mm
3C
CE
TUV
1NO/1NC Snap-action
Roller pressing plate type
With tail sleeve (Phenolic molding compound)
1N
0.22N
7.1mm
4mm
1.02mm
30.2±0.8mm
36.5mm
3C
CE
TUV
1NO/1NC Snap-action
Metal roller pressing plate type
With tail sleeve (Phenolic molding compound)
1N
0.22N
7.1mm
4mm
1.02mm
30.2±0.8mm
36.5mm
3C
CE
TUV
1NO/1NC Snap-action
Roller short pressing plate type
With tail sleeve (Phenolic molding compound)
1.6N
0.42N
10mm
5.6mm
1.27mm
30.2±0.4mm
32.5mm
3C
CE
TUV
1NO/1NC Snap-action
Metal roller short pressing plate type
With tail sleeve (Phenolic molding compound)
1.6N
0.42N
10mm
5.6mm
1.27mm
30.2±0.4mm
32.5mm
3C
CE
TUV
1NO/1NC Snap-action
Small linear pressing plate type
With tail sleeve (Phenolic molding compound)
0.1N
0.03N
20mm
5.6mm
3mm
19±0.8mm
-
3C
CE
TUV
1NO/1NC Snap-action
Type with curved swing bar
With tail sleeve (Phenolic molding compound)
0.7N
0.14N
10mm
5.6mm
1.27mm
37.2±0.8mm
42mm
3C
CE
TUV
1NO/1NC Snap-action
Spring short plunger type
With tail sleeve (Phenolic molding compound)
3.5N
1.14N
0.4mm
1.6mm
0.05mm
21.5±0.5mm
-
3C
CE
TUV
1NO/1NC Snap-action
Panel mounted plunger type
With tail sleeve (Phenolic molding compound)
3.5N
1.14N
0.4mm
5.5mm
0.05mm
21.8±0.8mm
-
3C
CE
TUV
1NO/1NC Snap-action
Panel mounting roller plunger type
With tail sleeve (Phenolic molding compound)
3.5N
1.14N
0.4mm
3.58mm
0.05mm
33.4±1.2mm
-
3C
CE
TUV
1NO/1NC Snap-action
Panel mounted lateral roller plunger type
With tail sleeve (Phenolic molding compound)
3.5N
1.14N
0.4mm
3.58mm
0.05mm
33.4±1.2mm
-
3C
CE
TUV
1NO/1NC Snap-action
Small vertical wheel plunger type
With tail sleeve (Phenolic molding compound)
3.5N
1.14N
0.4mm
3.58mm
0.05mm
33.4±1.2mm
-
3C
CE
TUV
1NO/1NC Snap-action
Large plastic roller long pressing plate type
With tail sleeve (Phenolic molding compound)
1N
0.2N
7.1mm
4mm
1.6mm
41.2±0.8mm
47.5mm
3C
CE
TUV
1NO/1NC Snap-action
One way action roller short pressing plate type
With tail sleeve (Phenolic molding compound)
1.6N
0.42N
2.7mm
2.4mm
0.5mm
43.1±0.8mm
43.6mm
3C
CE
TUV
1NO/1NC Snap-action
One way action metal roller short pressing plate type
With tail sleeve (Phenolic molding compound)
1.6N
0.42N
2.7mm
2.4mm
0.5mm
43.1±0.8mm
43.6mm
3C
CE
TUV
1NO/1NC Snap-action
Needle plunger type
With tail sleeve (Phenolic molding compound)
3.5N
1.14N
0.4mm
0.13mm
0.05mm
15.9±0.4mm
-
3C
CE
TUV
1NO/1NC Snap-action
Leaf spring type
With tail sleeve (Phenolic molding compound)
1.5N
0.14N
4mm
1.6mm
1.3mm
17.4±0.8mm
20.6mm
3C
CE
TUV
1NO/1NC Snap-action
Roller leaf spring type
With tail sleeve (Phenolic molding compound)
1.5N
0.14N
4mm
1.6mm
1.3mm
28.6±0.8mm
31.8mm
3C
CE
TUV
1NO/1NC Snap-action
Metal roller leaf spring type
With tail sleeve (Phenolic molding compound)
1.5N
0.14N
4mm
1.6mm
1.3mm
28.6±0.8mm
31.8mm
3C
CE
TUV
1NO/1NC Snap-action
Spring thin plunger type
With tail sleeve (Phenolic molding compound)
3.5N
1.14N
0.4mm
1.6mm
0.05mm
28.2±0.5mm
-
额定值 Ratings
This product specification complies with global standards. However, regional specifications may vary slightly.
