CZ-7 Series
CZ-7110
High plunger type
Degree of protection
IP64 Operating surface
Contact form
1NO/1NC Snap-action
Head structure
High plunger type
Operating force OF
6N
Release force RF
1N
Pretravel PT (Length)
2mm
Overtravel OT (Length)
5mm
Movement differential MD (Length)
0.8mm
Operating position OP
44±1.2mm
Features of the CZ-7 Series
■ Various actuators and some with adjustable operating position (such as CZ-7121)
■ Shell covered with intensive plastic for water-proof and oil-proof
■ The mechanical strength is better than CMV Series of horizontal limit switch
General Parameters
| Operating speed | 0.05mm-0.5m/s |
| Operating frequency | Electical: 20 operations/min |
| Contact resistance | 25mQmax.(initial value) |
| Insulation resistance | 100 MΩ min. (at 500 VDC max.) |
| Minimum applicable load | Max DC24V 10mA |
| Rated insulation voltage UI | 380 V |
| Rated impulse withstand voltage Uimp | 4KV |
| Conventional free air thermal current Ith | 10 A |
| Vibration | Malfunction Duration: 10-55Hz,1.5mm double amplitude |
| Dielectric strength | 1000VAC,50/60 HZ for1 minute between terminals of the same polarity 1500VAC,50/60 HZ for1 minute between current-carrying and non-current-carrying metal parts 1500VAC,50/60 HZ for 1 minute between each terminal and ground |
| Shock | Mechanical durable:1,000m/Sec²(about 100G'S) Malfunction:100m/Sec²(about 10G'S) |
| Ambient temperature | Using:-20~+70°C(With no icing) |
| Humidity | <85% RH |
| Electrical durability | More than 500,000 cycles(AC 240V/3A resistive load)More than 200,000 cycles(AC 240V/10A resistive load) |
| Degree of protection | IP64 Operating surface |
| AC-15 Safety specification certified rating | 10 A/250 V |
| DC-13 Safety specification certified rating | 0.3 A/220 V |
| CCC certification specification | GB/T14048.5 |
| TUV certification specification | EN 60947-5-1 |
| CE certification specification | EN 60947-5-1 |
Specification
3C
CE
TUV
1NO/1NC Snap-action
Long pressing plate type with roller
1.8N
0.5N
-
11mm
-
3mm
2.4mm
40±1mm
-
3C
CE
TUV
1NO/1NC Snap-action
Short platen type with roller
2.4N
0.8N
-
6.5mm
-
2mm
1.5mm
40±1mm
-
3C
CE
TUV
1NO/1NC Snap-action
Long platen type
1.5N
0.4N
-
13.5mm
-
4mm
3.2mm
25±1mm
35mm
3C
CE
TUV
1NO/1NC Snap-action
Short platen type
2.2N
0.6N
-
8.5mm
-
2.5mm
2mm
25±1mm
32mm
3C
CE
TUV
1NO/1NC Snap-action
High roller long pressing plate type
2N
0.6N
-
11mm
-
3mm
2.4mm
50±1.2mm
-
3C
CE
TUV
1NO/1NC Snap-action
High roller short pressing plate type
2.8N
1N
-
6.5mm
-
2mm
1.5mm
50±1.2mm
56mm
3C
CE
TUV
1NO/1NC Snap-action
Low plunger type
6N
1N
-
2mm
-
0.8mm
0.8mm
30.5±0.8mm
-
3C
CE
TUV
1NO/1NC Snap-action
High plunger type
6N
1N
-
2mm
-
5mm
0.8mm
44±1.2mm
-
3C
CE
TUV
1NO/1NC Snap-action
Panel mounted plunger type
6N
1N
-
2mm
-
6mm
0.8mm
21.8±1.2mm
-
3C
CE
TUV
1NO/1NC Snap-action
Panel mounted lateral roller plunger type
6N
1N
-
2mm
-
6mm
0.8mm
33.3±1.2mm
-
3C
CE
TUV
1NO/1NC Snap-action
Panel mounted vertical roller plunger type
6N
1N
-
2mm
-
6mm
0.8mm
33.3±1.2mm
-
3C
CE
TUV
1NO/1NC Snap-action
Plastic rod coil spring type
1.2N
-
15±5°
-
3±1°
-
-
-
-
额定值 Ratings
This product specification complies with global standards. However, regional specifications may vary slightly.
