.png)
Português
CJF11-06
◼Inside surge protection, reverse polarity protection, overcurrent
protection
◼Long use-life cycle and high reliability, easy install, enconomic price
◼Red LED status indication, easy to confirm work situation
◼Protection structure IP67(IEC standard)
◼Replaceable for limit switches
|
Item |
Code |
Description |
|
1 Company code |
C |
Company code |
|
2 Product name |
J |
Inductive proximity sensor |
|
3 Shape of shell |
F |
Square |
|
4 Dimension code |
10 |
10 Square10 |
|
5 Product type |
Without |
High-end type |
|
6 Detection distance |
05 |
05=5mm |
|
7 Output mode |
K |
AC 2wires |
|
L |
DC 2wires |
|
|
P |
PNP 3wires |
|
|
N |
NPN 3wires |
|
|
8 Output state |
A |
NO |
|
B |
NC |
|
|
C |
NO+NC |
|
|
9 Connection |
Without |
Without: Lead wire |
|
T |
Plug-in |
|
|
R |
Wiring leads Plug-in |
|
Model |
CJF10-05LA CJF10-05NA CJF10-05NB CJF10-05PA CJF10-05PB |
CJF11-06LA CJF11-06NA CJF11-06NB CJF11-06PA CJF11-06PB |
CJF12-07LA CJF12-07NA CJF12-07NB CJF12-07PA CJF12-07PB |
|
Sensing distance |
5mm |
6mm |
7mm |
|
Hysteresis |
Max. 10% of sensing distance |
||
|
Standard sensing target |
25×25×1mm |
||
|
Setting distance |
0~3.5mm |
0~3.5mm |
0~5.5mm |
|
Power supply (Operating voltage) |
12-24VDC (10-30VDC) |
||
|
Leakage current |
Max.10mA |
||
|
Response frequency (※1) |
500Hz |
500Hz |
400Hz |
|
Residual voltage |
DC : 3.5V Max. 3.5V DC : 1V Max. 1.0V |
||
|
Affection by Temp. |
Max. ±10% for sensing distance at ambient temperature 20℃ |
||
|
Control output |
Max. 200mA |
||
|
Insulation resistance |
Min. 50MΩ(at 500VDC megger) |
||
|
Dielectric strength |
1500VAC 50/60Hz for 1minute |
||
|
Vibration |
1mm amplitude at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 2 hours |
||
|
Shock |
500m/s2(approx. 50G) X, Y, Z directions for 3 times |
||
|
Indicator |
Operation indicator(red LED) |
||
|
Ambient temperature |
-25~+70℃ ( No icing) |
||
|
Storage temperature |
-30~+80℃ (No icing) |
||
|
Ambient humidity |
35~95%RH ( No condensation) |
||
|
Protection circuit |
Surge protection circuit, Reverse polarity protection circuit, Overcurrent protection circuit |
||
|
Cable |
φ3.8, 2P, 2m φ3.8, 3P, 2m |
||
|
(AWG22, Core diameter: 0.1mm, Number of cores: 25, Insulator diameter: φ1.25) |
|||
|
Material |
Case: PBT, Standard cable(Grey): Polyvinyl chloride(PVC) |
||
|
Protection |
IP67 |
||
(※1): The response frequency is the average value. The standard sensing target is used and the width is set as 2 times of the standard sensing target, 1/2 of the sensing distance for the distance.
|
Mutual-interference When several proximity sensors are mounted close to one another a malfunction of the sensor may be caused due to mutual interference. Therefore, be sure to provide a minimum distance between the two sensors as below chart indicates. |
Influence by surrounding metals When sensors are mounted on metallic panel, you must prevent the sensors from being affected by any metallic object except target. Therefore, be sure to provide a minimum distance as below chart indicates. |
Related Products
