CZ-3101

As a specialist of CZ-3101, CNTD Electric Technology Co., Ltd. can offer you comprehensive selections of goods in this industry.

Email: market@cntd.com

Tel: 18857728107

Whatsapp: 8618857728107

CZ-3101

description1

Zipper closure 1/5 zip athletic pullovers for men. Stretchy, lightweight, fast-drying fabric for superior performance. REGULAR FIT - US standard sizes. An athletic fit that sits close to the body for a wide range of motion, designed for optimal performance and all day comfort. FEATURES - Quarter zip closure;Thumbholes on long sleeves to keep them in place during workout

FEATURES

◼High mechanical strength, mainly consists of aluminum cast

◼Water proof, oil proof and dust proof construction

◼Various actuators for different applications

Ratings

Rated Voltage	Noninductive Load (A)				Inductive Load (A)
	Resistance Load		Lamp Load		Inductive Load		Motor Load
	NC	NO	NC	NO	NC	NO	NC	NO
125 VAC 250 VAC	5 (0.1) 3		1.5 1	0.7 0.5	3 2		2.5 1.5	1.3 0.8
8 VDC 14 VDC 30 VDC 125 VDC 250 VDC	5 (0.1) 5 (0.1) 4 (0.1) 0.4 0.2		2 2 2 0.05 0.03		5 4 3 0.4 0.2	4 4 3 0.4 0.2	3 3 3 0.05 0.03

Note: Product with spring, its usable range of operating part is within one third of the whole spring length from the front end of spring.

Rating	3A 240VAC (A300)
Operating speed	0.1m~0.5m/s
Operating frequency	30 operations/min
Contact resistance	25mΩ max. (initial).
Insulation resistance	100mΩ min. (at 500VDC)
Rated insulation voltage(UI)	400V
Dielectric strength	AC2500V/Umip 4KV
Vibration	10 to 55Hz, 1.5mm double amplitude
Shock	Mechanical: Approx. 1000m/s2 (Approx. 100G'S) Electrical: Approx. 300m/s2 (Approx. 30G'S)
Ambient temperature	Using：-20~+70℃（With no icing）
Ambient Humidity	< 95% RH
Electrical life	150,000 operations/min.
Protection level	IP65 (IEC Standard)

Operating Characteristics

Key plug in force	14.7N(1,500gf)
key pull out force	29.42N(3,000gf)
Pretravel	6 ±3mm
Total travel	(28mm)
Force required to have positive	58.84N(6,000gf)
Positive opening travel	10mm

Cautions

1.To prevent the wear and the space should be within 1mm between the key and middle of the insert hole.

2.When in use,there should put a plate on the top to prevent the key overinsert.To prevent nonmovement, the space between the plate and the switch should be under 3 mm.

Forced Disconnecting Mechanism

When the contact block get ﬁre, press on the middle of the key structure, the NC strict leaving structure can push the contact block a way cut off the movement.