

TZ-6104
◼Built-in CM horizontal limit switch
◼High mechanical strength, mainly consists of aluminum cast
◼Water-proof and oil-proof construction
◼Same rated value and characteristic with CM horizontal limit switch
◼Various actuators for different applications
Ratings
Rated Voltage |
Noninductive Load (A) |
Inductive Load (A) |
||||||
Resistance Load |
Lamp Load |
Inductive Load |
Motor Load |
|||||
NC |
NO |
NC |
NO |
NC |
NO |
NC |
NO |
|
125VAC 250VAC |
5 |
5 |
1.5 |
0.7 0.5 |
3 |
3 |
2 |
1 |
8VDC |
5 |
5 |
3 |
3 |
5 |
4 |
3 |
3 |
14VDC |
5 |
5 |
3 |
3 |
4 |
4 |
3 |
3 |
30VDC |
5 |
5 |
3 |
3 |
4 |
4 |
3 |
3 |
125VDC |
0.4 |
0.4 |
||||||
250VDC |
0.2 |
0.2 |
||||||
Inrush Current |
N.C: below 24A, N.O: below 12A |
NOTES: 1.Inductive load has a power factor of 0.4 min.(AC) and a time constant of 7 msec. max.(DC).
2.Lamp load has an inrush current of 10 times the steady-state current,while motor load has an inrush current of 6 times the steady-state current.
3.Product with spring, its usable range of operating part is within one third of the whole spring length from the front end of spring.
Operation speed |
5mm-0.5m/s |
Operating frequency |
Electical: 20 operations/min |
Contact resistance |
25mΩ max. (initial value) |
Insulation resistance |
100mΩ min. (below 500VDC) |
Dielectric strength |
1500VAC, 50/60 Hz for 1 minute between current-carrying and non--current-carrying metal parts |
1500VAC, 50/60 Hz for 1 minute between current-carrying and non--current-carrying metal parts |
|
1500VAC, 50/60 Hz for 1 minute between each terminal and ground |
|
Vibration |
10-55Hz,1.5mm double amplitude |
Shock |
Mechanical durable: 1, 000m/Sec2 (about 100G’S) Malfunction: 300m/Sec2 (about 30G’S) |
Ambient temperature |
Using:-20~+80℃(With no icing) |
Humidity |
<95% RH |
Electrical life |
500,000 operations above |
Protection level |
IP66 |
Model |
TZ-6 |
TZ- 6001 |
TZ- 6002 |
TZ- 6003 |
TZ- 6004 |
TZ- 6043 |
TZ- 6101 |
TZ- 6102 |
TZ- 6103 |
TZ- 6104 |
TZ- 6143 |
operating force |
OF(Max) |
250 ~350g |
250 ~350g |
570g |
570g |
800g |
500g |
640g |
640g |
||
Release force |
RF(Min.) |
114g |
114g |
170g |
170g |
240g |
100g |
230g |
230g |
||
Pre-trave |
PT(Max.) |
0.4mm |
0.5mm |
4mm |
4mm |
2mm |
1mm |
5mm |
5mm |
||
Movement diferential |
MD(Max.) |
0.05mm |
0.05mm |
0.4mm |
0.4mm |
0.1mm |
0.12mm |
0.4mm |
0.4mm |
||
over travel |
OT(Min.) |
5 . 5mm |
3.6mm |
6mm |
6mm |
5mm |
3.5mm |
6mm |
6mm |
||
operating position |
Op(mm.) |
38.2± 0.8mm |
49.7 ± 1mm |
|
|
45.8 ±0.8mm |
49.7 ± 0.8mm |
|